Digital.Complex: [build] Kellan's E-NTC3 - Digital.Complex

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

[build] Kellan's E-NTC3

#1 User is offline   aotsukisho 

  • D.C Administrator
  • PipPipPipPipPip
  • View blog
  • Group: Owner
  • Posts: 2,521
  • Joined: 18-October 05

Posted 24 July 2013 - 05:00 PM

Kellan asked me to do an electric conversion for his old Associated NTC3. The chassis was missing an engine, so it was the perfect platform to work with.

Posted Image
as received

Posted Image
view from the other side

Posted Image
the bottom

Posted Image
exhaust removed

Posted Image
starting to dismantle, getting at the driveshaft floating bearing holder

Posted Image
rear end completely off

Posted Image
diff case

Posted Image
the easiest motor mount I've ever built

Posted Image
I had to use a motor shaft adapter since the spur gear is 1.0M and all of my 1.0M pinions were 5mm bore

Posted Image
very good racing ESC, perhaps we should upgrade the steering servo cause it's really mushy

Posted Image
didn't care enough to put an actual battery tray in, zipties good enough for now.

It's fully functional with my old XR2i radio, the ground clearance (and possibly the springs) needs to be increased. The shocks also need rebuilding, but other than that it's completely brought back to life.
0

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users