Digital.Complex: n3DSXL internals - Digital.Complex

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

n3DSXL internals Rate Topic: -----

#1 User is offline   aotsukisho 

  • D.C Administrator
  • PipPipPipPipPip
  • View blog
  • Group: Owner
  • Posts: 2,521
  • Joined: 18-October 05

Posted 18 March 2016 - 05:22 PM

Steve recently modded his n3DSXL and asked if I could do the soldering on the inside.

Posted Image
These are the contact points for the adapter made to read/write to the flash through USB.

Posted Image
Holding the wires in place as this is where they'll exit to the top side of the board

Posted Image
This strip of electrical tape is an insulator, as we are mounting the pin headers here

Posted Image
Steve already dremeled out a hole to access these pins in the n3DSXL's case.

Posted Image
My extremely tiny solderwork on a microSD card adapter

Posted Image
Here's the adaptor sealed up and ready.

The project was a success, he was able to reflash his n3DSXL and run whatever he wanted on it.
0

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users