Digital.Complex: [nerf] Sledgefire (Zombie Strike) - Digital.Complex

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

[nerf] Sledgefire (Zombie Strike)

#1 User is offline   aotsukisho 

  • D.C Administrator
  • PipPipPipPipPip
  • View blog
  • Group: Owner
  • Posts: 2,512
  • Joined: 18-October 05

Posted 19 December 2013 - 06:21 PM

Modifying Itoe's Sledgefire.

Posted Image
Blaster as it is before pulling it apart

Posted Image
cracking open the shell

Posted Image
opening up the working internals. that is one huge plunger.

Posted Image
the air restrictors are angled like that so they don't interfere with the dart holder shell.

Posted Image
piston is glued together, so the drill press had a talk with them.

Note about this photo, I had cleaned up the edges of the openings quite well before reassembling the blaster. The slight discolorations around the openings is actually a rubber seal, as the barrel of the Sledgefire mates directly with the outside edges of the openings. If the seal is bad, the range of the blaster will be severely compromised.

Posted Image
I removed a lock in here that basically prevents the blaster from firing when the barrel is open, which I think was unnecessary and either way it was a bitch and a half to reinstall without having pieces fly everywhere as soon as I stopped holding on to them.

We rangetested them parallel to ground after the modification, and they shot about five to ten feet short of my modified Retaliator and Alpha Trooper. Not bad for a shotty.
0

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users