[Shonen]

this is so I don't confuse the shit out of me.

all pcb's are chImps (x4, $30 each)

Sho
Stick ($20): Myoungshin (black)
Buttons (x9, $2 each): Sanwa OBSF-30 (black)
USB passthrough ($8)
TOTAL: $76

Preston
Stick ($20): Myoungshin (green)

Cat Sue
Stick ($20): Myoungshin (green)
Buttons (x3, $2 each): Crown (black)
USB jack ($3)
TOTAL: $59

Steve
Buttons (x2, $4 each): Seimitsu PS-14-KN
USB passthrough ($8)
TOTAL: $46

doodoo gavin
Buttons (x4): Sanwa OBSF-30 (black)

edit: for reference
http://slagcoin.com/...ick/layout.html

[Shonen]

'thin' plexi: 2.16 mm
fat plexi: 5.15 mm
aluminum bracket: 3.15 mm thick
Myoungshin lip: 16.13 mm (~14mm total buffer space, ~8.82mm spacer after plexi

since the Sanwa buttons seem to only be able to accomodate 3.65 mm at the greatest, I'm gonna use the thin upper layer to actually snap shit into and then the lower layer. currently working on a diagram, taking 9000 hours in mspaint tho

[Shonen]

ok, got inspiration on the design for my stick graphic. I attached both the wallpaper and the wip psd file.

http://img12.yfrog.c...5069221144.png/

edit: attached diagram

Attached File(s)

•  stickidea.psd (2.52MB)
  Number of downloads: 2
•  stickideaoff.jpg (213.78K)
  Number of downloads: 3
•  stickideaon.jpg (227.07K)
  Number of downloads: 6
•  plexistick.PNG (10.82K)
  Number of downloads: 4